//
// Copyright (C) 2019  Intel Corporation. All rights reserved.
// Your use of Intel Corporation's design tools, logic functions
// and other software and tools, and any partner logic
// functions, and any output files from any of the foregoing
// (including device programming or simulation files), and any
// associated documentation or information are expressly subject
// to the terms and conditions of the Intel Program License
// Subscription Agreement, the Intel Quartus Prime License Agreement,
// the Intel FPGA IP License Agreement, or other applicable license
// agreement, including, without limitation, that your use is for
// the sole purpose of programming logic devices manufactured by
// Intel and sold by Intel or its authorized distributors.  Please
// refer to the applicable agreement for further details, at
// https://fpgasoftware.intel.com/eula.
//

// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
`include "../../lib/config.v"

module de10_pll50 (
   inclk0,
   c0,
   c1,
   locked);

   input   inclk0;
   output     c0;
   output     c1;
   output     locked;

   wire [0:0] sub_wire2 = 1'h0;
   wire [4:0] sub_wire3;
   wire  sub_wire6;
   wire  sub_wire0 = inclk0;
   wire [1:0] sub_wire1 = {sub_wire2, sub_wire0};
   wire [1:1] sub_wire5 = sub_wire3[1:1];
   wire [0:0] sub_wire4 = sub_wire3[0:0];
   wire  c0 = sub_wire4;
   wire  c1 = sub_wire5;
   wire  locked = sub_wire6;

   altpll   altpll_component (
            .inclk (sub_wire1),
            .clk (sub_wire3),
            .locked (sub_wire6),
            .activeclock (),
            .areset (1'b0),
            .clkbad (),
            .clkena ({6{1'b1}}),
            .clkloss (),
            .clkswitch (1'b0),
            .configupdate (1'b0),
            .enable0 (),
            .enable1 (),
            .extclk (),
            .extclkena ({4{1'b1}}),
            .fbin (1'b1),
            .fbmimicbidir (),
            .fbout (),
            .fref (),
            .icdrclk (),
            .pfdena (1'b1),
            .phasecounterselect ({4{1'b1}}),
            .phasedone (),
            .phasestep (1'b1),
            .phaseupdown (1'b1),
            .pllena (1'b1),
            .scanaclr (1'b0),
            .scanclk (1'b0),
            .scanclkena (1'b1),
            .scandata (1'b0),
            .scandataout (),
            .scandone (),
            .scanread (1'b0),
            .scanwrite (1'b0),
            .sclkout0 (),
            .sclkout1 (),
            .vcooverrange (),
            .vcounderrange ());
   defparam
      altpll_component.bandwidth_type = "AUTO",
      altpll_component.clk0_divide_by = 1,
      altpll_component.clk0_duty_cycle = 50,
      altpll_component.clk0_multiply_by = 1,
      altpll_component.clk0_phase_shift = "0",
      altpll_component.clk1_divide_by = 1,
      altpll_component.clk1_duty_cycle = 50,
      altpll_component.clk1_multiply_by = 1,
      altpll_component.clk1_phase_shift = "10000",
      altpll_component.compensate_clock = "CLK0",
      altpll_component.inclk0_input_frequency = 20000,
      altpll_component.intended_device_family = "MAX 10",
      altpll_component.lpm_hint = "CBX_MODULE_PREFIX=de10_pll50",
      altpll_component.lpm_type = "altpll",
      altpll_component.operation_mode = "NORMAL",
      altpll_component.pll_type = "AUTO",
      altpll_component.port_activeclock = "PORT_UNUSED",
      altpll_component.port_areset = "PORT_UNUSED",
      altpll_component.port_clkbad0 = "PORT_UNUSED",
      altpll_component.port_clkbad1 = "PORT_UNUSED",
      altpll_component.port_clkloss = "PORT_UNUSED",
      altpll_component.port_clkswitch = "PORT_UNUSED",
      altpll_component.port_configupdate = "PORT_UNUSED",
      altpll_component.port_fbin = "PORT_UNUSED",
      altpll_component.port_inclk0 = "PORT_USED",
      altpll_component.port_inclk1 = "PORT_UNUSED",
      altpll_component.port_locked = "PORT_USED",
      altpll_component.port_pfdena = "PORT_UNUSED",
      altpll_component.port_phasecounterselect = "PORT_UNUSED",
      altpll_component.port_phasedone = "PORT_UNUSED",
      altpll_component.port_phasestep = "PORT_UNUSED",
      altpll_component.port_phaseupdown = "PORT_UNUSED",
      altpll_component.port_pllena = "PORT_UNUSED",
      altpll_component.port_scanaclr = "PORT_UNUSED",
      altpll_component.port_scanclk = "PORT_UNUSED",
      altpll_component.port_scanclkena = "PORT_UNUSED",
      altpll_component.port_scandata = "PORT_UNUSED",
      altpll_component.port_scandataout = "PORT_UNUSED",
      altpll_component.port_scandone = "PORT_UNUSED",
      altpll_component.port_scanread = "PORT_UNUSED",
      altpll_component.port_scanwrite = "PORT_UNUSED",
      altpll_component.port_clk0 = "PORT_USED",
      altpll_component.port_clk1 = "PORT_USED",
      altpll_component.port_clk2 = "PORT_UNUSED",
      altpll_component.port_clk3 = "PORT_UNUSED",
      altpll_component.port_clk4 = "PORT_UNUSED",
      altpll_component.port_clk5 = "PORT_UNUSED",
      altpll_component.port_clkena0 = "PORT_UNUSED",
      altpll_component.port_clkena1 = "PORT_UNUSED",
      altpll_component.port_clkena2 = "PORT_UNUSED",
      altpll_component.port_clkena3 = "PORT_UNUSED",
      altpll_component.port_clkena4 = "PORT_UNUSED",
      altpll_component.port_clkena5 = "PORT_UNUSED",
      altpll_component.port_extclk0 = "PORT_UNUSED",
      altpll_component.port_extclk1 = "PORT_UNUSED",
      altpll_component.port_extclk2 = "PORT_UNUSED",
      altpll_component.port_extclk3 = "PORT_UNUSED",
      altpll_component.self_reset_on_loss_lock = "OFF",
      altpll_component.width_clock = 5;
endmodule

module de10_pll66 (
   inclk0,
   c0,
   c1,
   locked);

   input   inclk0;
   output     c0;
   output     c1;
   output     locked;

   wire [0:0] sub_wire2 = 1'h0;
   wire [4:0] sub_wire3;
   wire  sub_wire6;
   wire  sub_wire0 = inclk0;
   wire [1:0] sub_wire1 = {sub_wire2, sub_wire0};
   wire [1:1] sub_wire5 = sub_wire3[1:1];
   wire [0:0] sub_wire4 = sub_wire3[0:0];
   wire  c0 = sub_wire4;
   wire  c1 = sub_wire5;
   wire  locked = sub_wire6;

   altpll   altpll_component (
            .inclk (sub_wire1),
            .clk (sub_wire3),
            .locked (sub_wire6),
            .activeclock (),
            .areset (1'b0),
            .clkbad (),
            .clkena ({6{1'b1}}),
            .clkloss (),
            .clkswitch (1'b0),
            .configupdate (1'b0),
            .enable0 (),
            .enable1 (),
            .extclk (),
            .extclkena ({4{1'b1}}),
            .fbin (1'b1),
            .fbmimicbidir (),
            .fbout (),
            .fref (),
            .icdrclk (),
            .pfdena (1'b1),
            .phasecounterselect ({4{1'b1}}),
            .phasedone (),
            .phasestep (1'b1),
            .phaseupdown (1'b1),
            .pllena (1'b1),
            .scanaclr (1'b0),
            .scanclk (1'b0),
            .scanclkena (1'b1),
            .scandata (1'b0),
            .scandataout (),
            .scandone (),
            .scanread (1'b0),
            .scanwrite (1'b0),
            .sclkout0 (),
            .sclkout1 (),
            .vcooverrange (),
            .vcounderrange ());
   defparam
      altpll_component.bandwidth_type = "AUTO",
      altpll_component.clk0_divide_by = 3,
      altpll_component.clk0_duty_cycle = 50,
      altpll_component.clk0_multiply_by = 4,
      altpll_component.clk0_phase_shift = "0",
      altpll_component.clk1_divide_by = 3,
      altpll_component.clk1_duty_cycle = 50,
      altpll_component.clk1_multiply_by = 4,
      altpll_component.clk1_phase_shift = "7500",
      altpll_component.compensate_clock = "CLK0",
      altpll_component.inclk0_input_frequency = 20000,
      altpll_component.intended_device_family = "MAX 10",
      altpll_component.lpm_hint = "CBX_MODULE_PREFIX=de10_pll66",
      altpll_component.lpm_type = "altpll",
      altpll_component.operation_mode = "NORMAL",
      altpll_component.pll_type = "AUTO",
      altpll_component.port_activeclock = "PORT_UNUSED",
      altpll_component.port_areset = "PORT_UNUSED",
      altpll_component.port_clkbad0 = "PORT_UNUSED",
      altpll_component.port_clkbad1 = "PORT_UNUSED",
      altpll_component.port_clkloss = "PORT_UNUSED",
      altpll_component.port_clkswitch = "PORT_UNUSED",
      altpll_component.port_configupdate = "PORT_UNUSED",
      altpll_component.port_fbin = "PORT_UNUSED",
      altpll_component.port_inclk0 = "PORT_USED",
      altpll_component.port_inclk1 = "PORT_UNUSED",
      altpll_component.port_locked = "PORT_USED",
      altpll_component.port_pfdena = "PORT_UNUSED",
      altpll_component.port_phasecounterselect = "PORT_UNUSED",
      altpll_component.port_phasedone = "PORT_UNUSED",
      altpll_component.port_phasestep = "PORT_UNUSED",
      altpll_component.port_phaseupdown = "PORT_UNUSED",
      altpll_component.port_pllena = "PORT_UNUSED",
      altpll_component.port_scanaclr = "PORT_UNUSED",
      altpll_component.port_scanclk = "PORT_UNUSED",
      altpll_component.port_scanclkena = "PORT_UNUSED",
      altpll_component.port_scandata = "PORT_UNUSED",
      altpll_component.port_scandataout = "PORT_UNUSED",
      altpll_component.port_scandone = "PORT_UNUSED",
      altpll_component.port_scanread = "PORT_UNUSED",
      altpll_component.port_scanwrite = "PORT_UNUSED",
      altpll_component.port_clk0 = "PORT_USED",
      altpll_component.port_clk1 = "PORT_USED",
      altpll_component.port_clk2 = "PORT_UNUSED",
      altpll_component.port_clk3 = "PORT_UNUSED",
      altpll_component.port_clk4 = "PORT_UNUSED",
      altpll_component.port_clk5 = "PORT_UNUSED",
      altpll_component.port_clkena0 = "PORT_UNUSED",
      altpll_component.port_clkena1 = "PORT_UNUSED",
      altpll_component.port_clkena2 = "PORT_UNUSED",
      altpll_component.port_clkena3 = "PORT_UNUSED",
      altpll_component.port_clkena4 = "PORT_UNUSED",
      altpll_component.port_clkena5 = "PORT_UNUSED",
      altpll_component.port_extclk0 = "PORT_UNUSED",
      altpll_component.port_extclk1 = "PORT_UNUSED",
      altpll_component.port_extclk2 = "PORT_UNUSED",
      altpll_component.port_extclk3 = "PORT_UNUSED",
      altpll_component.self_reset_on_loss_lock = "ON",
      altpll_component.width_clock = 5;
endmodule

module de10_pll75 (
   inclk0,
   c0,
   c1,
   locked);

   input   inclk0;
   output     c0;
   output     c1;
   output     locked;

   wire [0:0] sub_wire2 = 1'h0;
   wire [4:0] sub_wire3;
   wire  sub_wire6;
   wire  sub_wire0 = inclk0;
   wire [1:0] sub_wire1 = {sub_wire2, sub_wire0};
   wire [1:1] sub_wire5 = sub_wire3[1:1];
   wire [0:0] sub_wire4 = sub_wire3[0:0];
   wire  c0 = sub_wire4;
   wire  c1 = sub_wire5;
   wire  locked = sub_wire6;

   altpll   altpll_component (
            .inclk (sub_wire1),
            .clk (sub_wire3),
            .locked (sub_wire6),
            .activeclock (),
            .areset (1'b0),
            .clkbad (),
            .clkena ({6{1'b1}}),
            .clkloss (),
            .clkswitch (1'b0),
            .configupdate (1'b0),
            .enable0 (),
            .enable1 (),
            .extclk (),
            .extclkena ({4{1'b1}}),
            .fbin (1'b1),
            .fbmimicbidir (),
            .fbout (),
            .fref (),
            .icdrclk (),
            .pfdena (1'b1),
            .phasecounterselect ({4{1'b1}}),
            .phasedone (),
            .phasestep (1'b1),
            .phaseupdown (1'b1),
            .pllena (1'b1),
            .scanaclr (1'b0),
            .scanclk (1'b0),
            .scanclkena (1'b1),
            .scandata (1'b0),
            .scandataout (),
            .scandone (),
            .scanread (1'b0),
            .scanwrite (1'b0),
            .sclkout0 (),
            .sclkout1 (),
            .vcooverrange (),
            .vcounderrange ());
   defparam
      altpll_component.bandwidth_type = "AUTO",
      altpll_component.clk0_divide_by = 2,
      altpll_component.clk0_duty_cycle = 50,
      altpll_component.clk0_multiply_by = 3,
      altpll_component.clk0_phase_shift = "0",
      altpll_component.clk1_divide_by = 2,
      altpll_component.clk1_duty_cycle = 50,
      altpll_component.clk1_multiply_by = 3,
      altpll_component.clk1_phase_shift = "6667",
      altpll_component.compensate_clock = "CLK0",
      altpll_component.inclk0_input_frequency = 20000,
      altpll_component.intended_device_family = "MAX 10",
      altpll_component.lpm_hint = "CBX_MODULE_PREFIX=de10_pll75",
      altpll_component.lpm_type = "altpll",
      altpll_component.operation_mode = "NORMAL",
      altpll_component.pll_type = "AUTO",
      altpll_component.port_activeclock = "PORT_UNUSED",
      altpll_component.port_areset = "PORT_UNUSED",
      altpll_component.port_clkbad0 = "PORT_UNUSED",
      altpll_component.port_clkbad1 = "PORT_UNUSED",
      altpll_component.port_clkloss = "PORT_UNUSED",
      altpll_component.port_clkswitch = "PORT_UNUSED",
      altpll_component.port_configupdate = "PORT_UNUSED",
      altpll_component.port_fbin = "PORT_UNUSED",
      altpll_component.port_inclk0 = "PORT_USED",
      altpll_component.port_inclk1 = "PORT_UNUSED",
      altpll_component.port_locked = "PORT_USED",
      altpll_component.port_pfdena = "PORT_UNUSED",
      altpll_component.port_phasecounterselect = "PORT_UNUSED",
      altpll_component.port_phasedone = "PORT_UNUSED",
      altpll_component.port_phasestep = "PORT_UNUSED",
      altpll_component.port_phaseupdown = "PORT_UNUSED",
      altpll_component.port_pllena = "PORT_UNUSED",
      altpll_component.port_scanaclr = "PORT_UNUSED",
      altpll_component.port_scanclk = "PORT_UNUSED",
      altpll_component.port_scanclkena = "PORT_UNUSED",
      altpll_component.port_scandata = "PORT_UNUSED",
      altpll_component.port_scandataout = "PORT_UNUSED",
      altpll_component.port_scandone = "PORT_UNUSED",
      altpll_component.port_scanread = "PORT_UNUSED",
      altpll_component.port_scanwrite = "PORT_UNUSED",
      altpll_component.port_clk0 = "PORT_USED",
      altpll_component.port_clk1 = "PORT_USED",
      altpll_component.port_clk2 = "PORT_UNUSED",
      altpll_component.port_clk3 = "PORT_UNUSED",
      altpll_component.port_clk4 = "PORT_UNUSED",
      altpll_component.port_clk5 = "PORT_UNUSED",
      altpll_component.port_clkena0 = "PORT_UNUSED",
      altpll_component.port_clkena1 = "PORT_UNUSED",
      altpll_component.port_clkena2 = "PORT_UNUSED",
      altpll_component.port_clkena3 = "PORT_UNUSED",
      altpll_component.port_clkena4 = "PORT_UNUSED",
      altpll_component.port_clkena5 = "PORT_UNUSED",
      altpll_component.port_extclk0 = "PORT_UNUSED",
      altpll_component.port_extclk1 = "PORT_UNUSED",
      altpll_component.port_extclk2 = "PORT_UNUSED",
      altpll_component.port_extclk3 = "PORT_UNUSED",
      altpll_component.self_reset_on_loss_lock = "OFF",
      altpll_component.width_clock = 5;
endmodule

module de10_pll100 (
   inclk0,
   c0,
   c1,
   locked);

   input   inclk0;
   output     c0;
   output     c1;
   output     locked;

   wire [0:0] sub_wire2 = 1'h0;
   wire [4:0] sub_wire3;
   wire  sub_wire6;
   wire  sub_wire0 = inclk0;
   wire [1:0] sub_wire1 = {sub_wire2, sub_wire0};
   wire [1:1] sub_wire5 = sub_wire3[1:1];
   wire [0:0] sub_wire4 = sub_wire3[0:0];
   wire  c0 = sub_wire4;
   wire  c1 = sub_wire5;
   wire  locked = sub_wire6;

   altpll   altpll_component (
            .inclk (sub_wire1),
            .clk (sub_wire3),
            .locked (sub_wire6),
            .activeclock (),
            .areset (1'b0),
            .clkbad (),
            .clkena ({6{1'b1}}),
            .clkloss (),
            .clkswitch (1'b0),
            .configupdate (1'b0),
            .enable0 (),
            .enable1 (),
            .extclk (),
            .extclkena ({4{1'b1}}),
            .fbin (1'b1),
            .fbmimicbidir (),
            .fbout (),
            .fref (),
            .icdrclk (),
            .pfdena (1'b1),
            .phasecounterselect ({4{1'b1}}),
            .phasedone (),
            .phasestep (1'b1),
            .phaseupdown (1'b1),
            .pllena (1'b1),
            .scanaclr (1'b0),
            .scanclk (1'b0),
            .scanclkena (1'b1),
            .scandata (1'b0),
            .scandataout (),
            .scandone (),
            .scanread (1'b0),
            .scanwrite (1'b0),
            .sclkout0 (),
            .sclkout1 (),
            .vcooverrange (),
            .vcounderrange ());
   defparam
      altpll_component.bandwidth_type = "AUTO",
      altpll_component.clk0_divide_by = 1,
      altpll_component.clk0_duty_cycle = 50,
      altpll_component.clk0_multiply_by = 2,
      altpll_component.clk0_phase_shift = "0",
      altpll_component.clk1_divide_by = 1,
      altpll_component.clk1_duty_cycle = 50,
      altpll_component.clk1_multiply_by = 2,
      altpll_component.clk1_phase_shift = "5000",
      altpll_component.compensate_clock = "CLK0",
      altpll_component.inclk0_input_frequency = 20000,
      altpll_component.intended_device_family = "MAX 10",
      altpll_component.lpm_hint = "CBX_MODULE_PREFIX=de10_pll100",
      altpll_component.lpm_type = "altpll",
      altpll_component.operation_mode = "NORMAL",
      altpll_component.pll_type = "AUTO",
      altpll_component.port_activeclock = "PORT_UNUSED",
      altpll_component.port_areset = "PORT_UNUSED",
      altpll_component.port_clkbad0 = "PORT_UNUSED",
      altpll_component.port_clkbad1 = "PORT_UNUSED",
      altpll_component.port_clkloss = "PORT_UNUSED",
      altpll_component.port_clkswitch = "PORT_UNUSED",
      altpll_component.port_configupdate = "PORT_UNUSED",
      altpll_component.port_fbin = "PORT_UNUSED",
      altpll_component.port_inclk0 = "PORT_USED",
      altpll_component.port_inclk1 = "PORT_UNUSED",
      altpll_component.port_locked = "PORT_USED",
      altpll_component.port_pfdena = "PORT_UNUSED",
      altpll_component.port_phasecounterselect = "PORT_UNUSED",
      altpll_component.port_phasedone = "PORT_UNUSED",
      altpll_component.port_phasestep = "PORT_UNUSED",
      altpll_component.port_phaseupdown = "PORT_UNUSED",
      altpll_component.port_pllena = "PORT_UNUSED",
      altpll_component.port_scanaclr = "PORT_UNUSED",
      altpll_component.port_scanclk = "PORT_UNUSED",
      altpll_component.port_scanclkena = "PORT_UNUSED",
      altpll_component.port_scandata = "PORT_UNUSED",
      altpll_component.port_scandataout = "PORT_UNUSED",
      altpll_component.port_scandone = "PORT_UNUSED",
      altpll_component.port_scanread = "PORT_UNUSED",
      altpll_component.port_scanwrite = "PORT_UNUSED",
      altpll_component.port_clk0 = "PORT_USED",
      altpll_component.port_clk1 = "PORT_USED",
      altpll_component.port_clk2 = "PORT_UNUSED",
      altpll_component.port_clk3 = "PORT_UNUSED",
      altpll_component.port_clk4 = "PORT_UNUSED",
      altpll_component.port_clk5 = "PORT_UNUSED",
      altpll_component.port_clkena0 = "PORT_UNUSED",
      altpll_component.port_clkena1 = "PORT_UNUSED",
      altpll_component.port_clkena2 = "PORT_UNUSED",
      altpll_component.port_clkena3 = "PORT_UNUSED",
      altpll_component.port_clkena4 = "PORT_UNUSED",
      altpll_component.port_clkena5 = "PORT_UNUSED",
      altpll_component.port_extclk0 = "PORT_UNUSED",
      altpll_component.port_extclk1 = "PORT_UNUSED",
      altpll_component.port_extclk2 = "PORT_UNUSED",
      altpll_component.port_extclk3 = "PORT_UNUSED",
      altpll_component.self_reset_on_loss_lock = "OFF",
      altpll_component.width_clock = 5;
endmodule

module de10_ram16k (
   address,
   byteena,
   clock,
   data,
   rden,
   wren,
   q);

   input [12:0]  address;
   input [1:0]  byteena;
   input   clock;
   input [15:0]  data;
   input   rden;
   input   wren;
   output   [15:0]  q;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_off
`endif
   tri1  [1:0]  byteena;
   tri1    clock;
   tri1    rden;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_on
`endif

   wire [15:0] sub_wire0;
   wire [15:0] q = sub_wire0[15:0];

   altsyncram  altsyncram_component (
            .address_a (address),
            .byteena_a (byteena),
            .clock0 (clock),
            .data_a (data),
            .rden_a (rden),
            .wren_a (wren),
            .q_a (sub_wire0),
            .aclr0 (1'b0),
            .aclr1 (1'b0),
            .address_b (1'b1),
            .addressstall_a (1'b0),
            .addressstall_b (1'b0),
            .byteena_b (1'b1),
            .clock1 (1'b1),
            .clocken0 (1'b1),
            .clocken1 (1'b1),
            .clocken2 (1'b1),
            .clocken3 (1'b1),
            .data_b (1'b1),
            .eccstatus (),
            .q_b (),
            .rden_b (1'b1),
            .wren_b (1'b0));
   defparam
      altsyncram_component.byte_size = 8,
      altsyncram_component.clock_enable_input_a = "BYPASS",
      altsyncram_component.clock_enable_output_a = "BYPASS",
      altsyncram_component.init_file = `CPU_TEST_FILE,
      altsyncram_component.intended_device_family = "MAX 10",
      altsyncram_component.lpm_hint = "ENABLE_RUNTIME_MOD=NO",
      altsyncram_component.lpm_type = "altsyncram",
      altsyncram_component.numwords_a = 8192,
      altsyncram_component.operation_mode = "SINGLE_PORT",
      altsyncram_component.outdata_aclr_a = "NONE",
      altsyncram_component.outdata_reg_a = "UNREGISTERED",
      altsyncram_component.power_up_uninitialized = "FALSE",
      altsyncram_component.ram_block_type = "M9K",
      altsyncram_component.read_during_write_mode_port_a = "NEW_DATA_NO_NBE_READ",
      altsyncram_component.widthad_a = 13,
      altsyncram_component.width_a = 16,
      altsyncram_component.width_byteena_a = 2;
endmodule

module de10_ram32k (
   address,
   byteena,
   clock,
   data,
   rden,
   wren,
   q);

   input [13:0]  address;
   input [1:0]  byteena;
   input   clock;
   input [15:0]  data;
   input   rden;
   input   wren;
   output   [15:0]  q;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_off
`endif
   tri1  [1:0]  byteena;
   tri1    clock;
   tri1    rden;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_on
`endif

   wire [15:0] sub_wire0;
   wire [15:0] q = sub_wire0[15:0];

   altsyncram  altsyncram_component (
            .address_a (address),
            .byteena_a (byteena),
            .clock0 (clock),
            .data_a (data),
            .rden_a (rden),
            .wren_a (wren),
            .q_a (sub_wire0),
            .aclr0 (1'b0),
            .aclr1 (1'b0),
            .address_b (1'b1),
            .addressstall_a (1'b0),
            .addressstall_b (1'b0),
            .byteena_b (1'b1),
            .clock1 (1'b1),
            .clocken0 (1'b1),
            .clocken1 (1'b1),
            .clocken2 (1'b1),
            .clocken3 (1'b1),
            .data_b (1'b1),
            .eccstatus (),
            .q_b (),
            .rden_b (1'b1),
            .wren_b (1'b0));
   defparam
      altsyncram_component.byte_size = 8,
      altsyncram_component.clock_enable_input_a = "BYPASS",
      altsyncram_component.clock_enable_output_a = "BYPASS",
      altsyncram_component.init_file = `CPU_TEST_FILE,
      altsyncram_component.intended_device_family = "MAX 10",
      altsyncram_component.lpm_hint = "ENABLE_RUNTIME_MOD=NO",
      altsyncram_component.lpm_type = "altsyncram",
      altsyncram_component.numwords_a = 16384,
      altsyncram_component.operation_mode = "SINGLE_PORT",
      altsyncram_component.outdata_aclr_a = "NONE",
      altsyncram_component.outdata_reg_a = "UNREGISTERED",
      altsyncram_component.power_up_uninitialized = "FALSE",
      altsyncram_component.read_during_write_mode_port_a = "NEW_DATA_NO_NBE_READ",
      altsyncram_component.widthad_a = 14,
      altsyncram_component.width_a = 16,
      altsyncram_component.width_byteena_a = 2;
endmodule

//______________________________________________________________________________
//
// Initialized RAM block - 8K x 16
//
module wbc_mem
(
   input          wb_clk_i,
   input  [15:0]  wb_adr_i,
   input  [15:0]  wb_dat_i,
   output [15:0]  wb_dat_o,
   input          wb_cyc_i,
   input          wb_we_i,
   input  [1:0]   wb_sel_i,
   input          wb_stb_i,
   output         wb_ack_o
);
wire [1:0] ena;
reg [1:0]ack;

de10_ram16k ram(
   .address(wb_adr_i[13:1]),
   .byteena(ena),
   .clock(wb_clk_i),
   .data(wb_dat_i),
   .rden(~wb_we_i & wb_cyc_i & wb_stb_i),
   .wren( wb_we_i & wb_cyc_i & wb_stb_i),
   .q(wb_dat_o));

assign ena = wb_we_i ? wb_sel_i : 2'b11;
assign wb_ack_o = wb_cyc_i & wb_stb_i & (ack[1] | wb_we_i);
always @ (posedge wb_clk_i)
begin
   ack[0] <= wb_cyc_i & wb_stb_i;
   ack[1] <= wb_cyc_i & ack[0];
end
endmodule

//______________________________________________________________________________
//
// Initialized RAM block - 16K x 16
//
module wbc_mem_32k
(
   input          wb_clk_i,
   input  [15:0]  wb_adr_i,
   input  [15:0]  wb_dat_i,
   output [15:0]  wb_dat_o,
   input          wb_cyc_i,
   input          wb_we_i,
   input  [1:0]   wb_sel_i,
   input          wb_stb_i,
   output         wb_ack_o
);
wire [1:0] ena;
reg  [1:0] ack;

de10_ram32k ram(
   .address(wb_adr_i[14:1]),
   .byteena(ena),
   .clock(wb_clk_i),
   .data(wb_dat_i),
   .rden(~wb_we_i & wb_cyc_i & wb_stb_i),
   .wren( wb_we_i & wb_cyc_i & wb_stb_i),
   .q(wb_dat_o));

assign ena = wb_we_i ? wb_sel_i : 2'b11;
assign wb_ack_o = wb_cyc_i & wb_stb_i & (ack[1] | wb_we_i);
always @ (posedge wb_clk_i)
begin
   ack[0] <= wb_cyc_i & wb_stb_i;
   ack[1] <= wb_cyc_i & ack[0];
end
endmodule